Introduction

Before you start recording, you need do some configurations. 3D MP3 Sound Recorder G2 has some default setting, such as default wav file settings, output file name and location, default file format etc. However you need to select a correct audio line depends on your recording tasks.

To Select an audio line , you just need to click the line configuration button (on the right side) to open the audio line configuration window.

in Windows Vista, the Audio lines maybe treated as Devices, and each device may only has

it may like the following picture after click the device button, Just select one of the Device by click the white bar.

3.2 Record Streaming Audio

A ) Find audio line for streaming audio recording
	Usually the audio line for streaming audio recording has the name of Stereo Mix or Wave out . but it's name may be different for different sound card. If you know the name of stream audio line, you just click on the that socket to active the line as shown in the following picture (in the example the line name is called Stereo Mix ) Configure audio line for playback recording automatically Close all media players. Click the "Auto Detect" button and the program will test each line. If an audio line suitable for playback recording is found, you will see the message on the screen. If not found, you need to do manual configuration. Configure audio line for playback recording manually . If a audio line suitable for playback recording is not found by automatic configuration, you need to test each line manually. Turn on your speaker, close all media players. Click on the first socket, the first socket will be lighted , and at the same time you will hear the sound "Line one" ,wait until the green ring disappear . if you can hear the echo of sound "Line One" , then click on the red button to close this window. Otherwise you need to test other lines.. If you can not hear the echo when you click on the first socket, then click on other sockets. When you hear the echo sound of "Line x", where x is the number of the line, that means this line can be used for playback recording.
B ) Open other media player to play audio.
C ) Click the record button to start recording.

3.3 Record from microphone

3.4 Record from audio cassette player or DVD player

A ) Connect audio cassette player or DVD player to your PC
	use a single stereo audio cable to connect audio cassette player to the line in jack of the sound card: use a stereo audio cable which one end has two single channel plugs to connect audio cassette player to the line in jack of the sound card:
B ) Activate the audio line of Line In.

C ) Play the audio cassette player or DVD player
D ) Click the record button to start recording.

A ) Connect microphone to your PC
	Connect the microphone to the microphone jack of the sound card.
B ) Activate the audio line of microphone.

C ) Speak to microphone
D ) Click the record button to start recording.

3.1 Configuration

3.2 Record Streaming Audio

3.3 Record from microphone

3.4 Record from audio cassette player or DVD player